USE : New construction / Temporary installation /
         Partical replacement, etc.

- MJG -
Product Size : 20A ~ 300A
This has the separation-resistance-pipe joint way which can
fix the pipe, and thus the grip ring is fixed in the inner part of Joint.
It is the new way which replaces the existing joint way
(welding, flange, union and groove joint) and thus is widely used in the
developed country, and is the newest connection method which
does not need to process the end of pipe.

- MJGL -
Product Size : 20A ~ 300A
It is applied equally with MJG, but the length of joint is 1.6 ~ 2 times,
and it can be connected to the part which the loose is caused.

USE : New construction / Temporary installation /
         Partical replacement, etc.

- MJS -
Product Size : 15A ~ 2000A
The inner part of Joint consists of the rubber sleeve and thus can absorb
the impact, vibration, bending (2' ~ 4'), noise (about 60% compared
with the welding) and elasticity, and it has no separation-resistance
device and thus for the new setting-up, the pipe is fixed and then is
used.

- MJL -
Product Size : 25A ~ 2000A
It is applied equally with MJS and the length of joint is 1.6 ~ 2 times,
and it can be used to the case which the loose conditions and the
elasticity scope are big.

USE : Repair / Temporary installation / New construction /
         Partial replacement / Prevent for special welding part etc.

- MJD -
Product Size : 15A ~ 2000A
The locking device of bolt is located to both sides and so the
permissible scope is wide. And, it can be easily operated in the big
diameter and the tighting power is good. Also, the inner rubber packing
is incised and thus it is suitable for the repairing of big diameter.

- MJDL -
Product Size : 25A ~ 2000A
It is applied equally with MJD and the length of joint is 1.6 ~ 2 times and
when it is used for the new setting up, it is applied to the case
which the loose conditions or the elasticity scope is big, and in
case it is used for the repairing, it can be applied to the case which the
damage scope of pipe is wide.

USE : Repair

- MJR -
Product Size : 15A ~ 2000A
It is mainly used for the repairing and when it is worked with
one-sided opening type which uses the incised part, the work can be
conveniently done if the tightener is used.

- MJRL -
Product Size : 25A ~ 2000A
It is applied equally with MJR and the length of joint is 1.6 ~ 2 times
and it can be used to the case which the damage scope of pipe is wide.

USE : Repair / Temporary installation / Parcial replacement /
         New construction / Prevent for special welding part, etc.

- MJH -
Product Size : 15A ~ 300A
This is mainly used for the repairing of small diameter below 150A and
the hinge is fixed to the opposite side of locking device, and the inner
rubber packing is incised, and thus it is suitable for the repairing of
small diameter.

- MJHL -
Product Size : 25A ~ 300A
It is applied equally with MJH and the length of joint is 1.6 ~ 2 times and
when it is used for the new setting up, it is applied to the case which
the loose conditions or the elasticity scope is big, and in case it is
used for the repairing, it can be applied to the case which the damage scope of pipe is wide for the repairing of small diameter.

- MJG-A -
Product Size : 50A ~ 300A
It is the type same as MJG, but is made to be able to fix all kinds of
accessories.

- MJD-A -
Product Size : 50A ~ 2000A
It is the type same as MJD, but is made to be able to fix all kinds of accessories.

USE : Repair of Elbow and welding part.

- MJER -
Product Size : 15A ~ 250A
The locking device of bolt is located to both sides and it is mainly
used for the leakage of elbow part or welding part by a damage.

- OKSA -
Product Size : 100A ×200A ∼ 1000A
As the connection of branch pipe, it has the way which it bores PE
pipe and then the saddle is fixed with the band.